曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
SKIP
This switch skips checklist items on the display.
FRMT
The FRMT switch selects the MFD format. The available selections are present position (PPOS, heading at top), PLAN (North at top), TCAS only.
TFC
The TFC switch selects the TCAS overlays on the MFD.
TR/WX
The TR/WX switch selects terrain, weather, and lightning overlays on the MFD.
ENTER
The ENTER switch is used in conjunction with the joystick for entering waypoints, completing checklist items, or while in the maintenance mode.
SUMRY
Selecting the SUMRY switch displays the summary synoptic on the bottom part of the MFD.
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
03-02-05
AURAL/VISUAL ALERTS
ENGINE INDICATING AND CREW ALERTING SYSTEM (EICAS) (Cont) MFD CONTROL PANEL (MCP) (Cont)
A/ICE
Selecting the A/ICE switch displays the anti-ice synoptic page.
ECS
Selecting the ECS switch displays the environmental control system synoptic page.
ELEC
Selecting the ELEC switch displays the electrical system synoptic page.
FLT
Selecting the FLT switch displays the flight control system synoptic page.
FUEL
Selecting the FUEL switch displays the fuel system synoptic page.
HYD
Selecting the HYD switch displays the hydraulic system synoptic page.
MULTIFUNCTION DISPLAY (MFD)
ENGINE INDICATIONS
Engine indications are presented as digital readouts and also in an analog scale format for N1 and ITT. The indications are located on the top half of the left MFD. Displayed engine parameters include: -N1 speed (%) -Interturbine temperature (ITT) (°C) -N2 speed (%) -Oil pressure (psi) -Oil temperature (°C) -Fuel flow (lb/hr-kg/hr) The following engine indications are presented “as required”: -Reverse thrust icons (REV) are displayed within the N1 analog gage when the thrust reversers are in transition (white), deployed (green), or red (unsafe) -A VIB (amber) icon is displayed below the N1 gage when the vibration exceeds a predetermined value and has an associated CAS message -SYNC or MACH HOLD display shows between the N1 analog displays when either the engine sync or Mach hold mode is selected (green when active and white when armed) -The ignition icon (IGN) is displayed below the ITT gage when the ignitor is operating (green) or failed (amber) -The START icon is displayed vertically outside of the digital displays of N2, oil pressure, oil temperature, and fuel flow when the FADEC is commanding a start
AUXILIARY POWER UNIT
The APU digital RPM and EGT displays (green) are presented below the engine instruments on the top half of the left MFD.
FUEL QUANTITY
Fuel quantities are displayed below the APU RPM and EGT information in green on the EICAS. Fuel quantities presented include left, right, and total.
TRIM SETTINGS
Aileron, horizontal stabilizer, and rudder trim settings are continuously displayed on the upper middle of the left MFD.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-语音和视觉警报 Aural and Visual Alerts(6)
|
