|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
The external lights control panel includes switches for the following lights:
.
Navigation.
.
Strobe beacon.
.
Wing inspection.
.
Landing/taxi.
.
Taxi recognition.
.
Logo (if installed)
All external lighting is controlled by switches located on the EXTERNAL LIGHTS control panel.
BEACON Switch STROBE Switch
WHT position . When selected, the
ON . Illuminates the wing beacon lights will illuminate white. and tail anti-collision lights.
OFF position . When selected, the
OFF . Turns off the wing beacon lights will turn off. and tail anti-collision lights.
NAV Switch WING INSP Switch
ON . Illuminates the wing and . Illuminates thetail navigation lights.
wing inspection lights.
OFF . Turns off the wing and
. Turns off thetail navigation lights.
wing inspection lights.
LOGO Lights (If installed)
ON . Illuminates the logo lights.
OFF . Turns off the logo lights.
TAXI/RECOG SwitchL WING Switch
ON . Illuminates thePULSE . Illuminates the wing taxi lights.
landing and taxi light on and off to achieve a strobe effect OFF . Turns off the on the left wing. wing taxi lights.
STEADY . Illuminates and taxi light on and off to achieve
the landing and taxi lights R WING Switch
a strobe effect on the nose gearon the left wing.
PULSE . Illuminates the landing
OFF . Turns off the assembly.
and taxi light on and off to achieveSTEADY . Illuminates the landing
landing and taxi lights on
a strobe effect on the right wing.
and taxi lights on the nose gearthe left wing.
STEADY . Illuminates the landing and taxi lights on the right wing.
assembly.
OFF . Turns off the landing and taxi lights on the nose gear assembly.
OFF . Turns off the landing and taxi lights on the right wing.
FGF1610_004
Volume 2 Flight Crew Operating Manual Rev 2A, Apr 11, 2005
Landing Lights
A landing light is installed in each wing leading edge and two landing lights are installed on the nose gear. Each wing light is controlled by a dedicated PULSE/OFF/STEADY switch, while both nose landing lights are controlled by a single PULSE/OFF/STEADY switch. In the pulse position, the landing light is designed to pulse in a strobe effect that will make the aircraft visible and enhance visual identification from other aircraft. Normally, under dark conditions the landing lights are operated in the pulse position. The left landing and nose landing lights will be flashing in an alternating sequence with the right landing and nose lights. The pulselite control unit operates the pulsing sequence at 45 times per minute.
Wing Landing/Taxi Lights
Combined landing/taxi lights are installed in each wing fairing (leading edge) and controlled by individual switches on the EXTERNAL LIGHTS panel in the overhead panel. Selecting the individual “L or R WING”switch will illuminate the landing and taxi lights on the applicable side.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-灯光(11)
| 
