曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
ICE DETECTED TO/LAND Ice has been detected and the engine and wing anti-ice systems are selected on ICE DETECTOR FAULT TO/LAND One ice detector has failed; the other should continue to operate normally L (R) PROBE HT CTRL FAIL TO/LAND The respective probe heat controller has failed. The probe heat will fail ON TAT HEAT FAIL TO/LAND The total air temperature probe heater has failed WING SOURCE XBLEED Wing xbleed valve open WING ANTI-ICE FAULT TO/LAND One channel has failed on the outboard wing leading-edge sensor. The wing anti-ice should work normally L (R) ENGINE ANTI ICE ON The respective (or both) ENG ANTI-ICE switch(es) is/are ON ENGINE ANTI-ICE ON The respective (or both) ENG ANTI-ICE switch(es) is/are ON PROBE HEAT TEST OK The pilot initiated probe heat test has passed. WING ANTI-ICE ON The WING ANTI-ICE switch is selected ON WING/ENG ANTI-ICE ON The wing and both engine anti-ice systems are ON WING SOURCE XBLEED Either FROM L or FROM R has been selected on the ANTI-ICE WING SOURCE switch Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
|