曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Indicates FLC mode
Indicates HDG mode
GF0410_002
is armed or engaged is armed or engaged
Rev 2A, Apr 11, 2005 Flight Crew Operating Manual
Volume 2
AUTOMATIC FLIGHT CONTROL SYSTEM
GUIDANCE PANEL
Flight Director (FD) Switch
Used to remove flight director command bars Heading (HDG)from the PFD not selected
Switch
by the flight director. Used to activate the lateral guidance to compute steering commands, based on selected heading.
Bank (BANK)Switch Used to manually select bank angle limit in HDG, VOR, or NAV modes.
Heading (HDG)Button
Used to move the heading bug on PFD.
Push Synchronize (PUSHSYNC) Button
When pushed, causes heading bug to synchronize
to airplane heading.
Course 1 (CRS 1)
Button
Used to move the course pointer on
Approach (APP) Switch
selected PFD.
Used to arm the lateral
Back Course (BC)
Push Direct (PUSH
guidance for localizer or VOR Switch
approach capture. When Used to select approach When pushed,
DCT) Button
localizer capture, vertical mode guidance for capture
guidance is armed for and tracking of back course pointer to
causes course
glideslope data.
indicate deviation Speed (SPD) capture.course to tuned Button VOR. Used to set speed on
PFD (manually or by use
of FMS).
MAN Airspeed reference NOTE set by turning inner knob.Annunciator, (on all flight
director mode switches),
FMS
illuminates when selected
Airspeed reference set
mode is armed or active.
by FMS.
PUSH CHG
Annunciator
When inner knob Lightpushed, changes IAS to Mach or Mach to IAS.
GF0410_003
Volume 2 Flight Crew Operating Manual Rev 2A, Apr 11, 2005
Autopilot (AP)Switch
Used to engage and disengage autopilot. When autopilot engaged, the yaw damper is engaged simultaneously. Disengaging the autopilot does not
disengage the yaw damper.
Switch
AP and YD Pointers
Illuminates to indicate which AP FGC or YD is engaged. Whichever AP or YD pointer was active on the last landing becomes the standby FGC on
(VNAV) Switch
Flight Director (FD)
Switch
selected FMS.
Used to remove flight director command bars from the PFD not selected by the flight director.
Course 2 (CRS 2)
Button
Used to move the course pointer on selected PFD.
Push Direct (PUSH DCT)Button
When pushed, causes course pointer to indicate deviation course to tuned VOR.
CPL Pointer
Illuminates to indicate whether the associated AP is coupled to FGC1 or to FGC2. Bothdirector active.
pointers will illuminate during an ILS approach. and speed increase.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-自动飞行控制系统(2)
| 
