曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
INTEGRATED RADIO SYSTEM SCHEMATIC
VOR/LOC,GS, DME,MKR TRANSPONDER VHF 1, 2, (Optional) 3BCN, ADF ANTENNAS ANTENNAS
ANTENNAS
Rev 12, Aug 14, 2006 Flight Crew Operating Manual Volume 2
The following is a description of the panel controls and information available on the RMU.
Main Tuning Page
Line Select
Keys
RMU 1 (Pilot’s)
PILOT’S WINDOW
Contains the following:
COM 1
NAV 1
ATC/TCAS
ADF 1
TCAS
DSPY 1
HF 1
Transfer Key
Cursor Box
Tuning Knobs
RMU 2 (Copilot’s) COPILOT’S WINDOW
Contains the following:
COM 2
NAV 2
ATC/TCAS
ADF 2
TCAS DSPY 2
HF 2
GF0610_014 GF0610_013
Volume 2 Flight Crew Operating Manual Rev 2A, Apr 11, 2005
The RMU is mounted in the centre pedestal. It is a colour Liquid Crystal Display (LCD) based radio tuning controller that provides centralized control and display of frequencies, channels, codes and modes set on the communications and navigation receivers. Each RMU provides single point control of both the on-side and cross-side radios. The RMUs provide on-side and cross-side access to the following radios:
RMU . 1 RMU . 2
VHF COM . 1 VHF COM . 2
VHF NAV . 1 VHF NAV . 2
DME . 1 DME . 2
ADF . 1 ADF . 2
ATC . 1 ATC . 2
TCAS DSPY 1 TCAS DSPY 2
HF . 1 HF . 2
The RMU uses the concept of selecting a function by pushing a line select key next to the parameter that you wish to control. Any selectable parameter may be changed by pressing the corresponding line key next to the displayed parameter and then rotating the concentric tuning knobs to set the desired value.
The RMU display is divided into dedicated windows. Each window groups the data associated with a particular function of the radio system. The windows COM, NAV, ATC, HF, ADF and TCAS each provide for complete control of frequency and operating mode of the associated function.
The RMU also has other display modes, called pages, which perform additional features and functions for the control of the radio system. A menu of the pages is provided to access these additional functions.
Located on the front of the RMU is a button labeled PGE, which when pressed, causes the system page menu to be displayed. Pressing PGE will allow the selection of other functions such as:
.
Radio page: Normal tuning.
.
COMM memory: Preset COMM frequencies.
.
NAV memory: Preset VOR NAV frequencies.
.
ATC/TCAS: ATC/TCAS display parameters.
.
HF control: Preset and Direct tune modes.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier_Global-通讯(5)
| 
