飞行翻译_公务机_公务航空_Business Jet_Business Aviation

Function Keys (Cont’d)
Pressing the cross-side

key, with the cursor in a window (except ATC /TCAS) display transfers the entire RMU operation and display to the cross.side radio system. The legend colour changes from white to magenta when the RMU is displaying and is in control of, data associated with the cross.side system. Pressing the 1/2 key with the cursor on the mode line of the ATC.TCAS window and the transponder in other than STANDBY mode allows to switch between transponder 1 and 2.

Rev 2A, Apr 11, 2005 Flight Crew Operating Manual Volume 2
Function Keys (Cont’d)
Pressing the page

key once will change the RMU display to the Menu page. When not on the radio tuning page (main or system page ), the RMU assigns a RETURN function to the lower left line select key. Pressing this key returns the display to the radio tuning page.

GF0610_030
Pressing the store

key results in a temporary (TEMP) COM/NAV preselect frequency to be
stored in memory.

The temporary preselect frequency is assigned a numbered location, provided the cursor has been first placed around that frequency or code.
Volume 2 Flight Crew Operating Manual Rev 3, Apr 25, 2005 06.10.14 CSP 700.5000.6
Function Keys (Cont’d)
While on the main tuning page, press the

function key once to display the SYSTEM 1 PAGE MENU. Next press the line select key for the COM MEMORY to view the frequency held in memory.

Step 1

Pressing the identification

key places the transponder in the identification response mode. The transponder will go into ident mode for approximately 18 seconds when the ID function key is pushed and an ID annunciator will appear.

GF0610_035
Rev 3, Apr 25, 2005 Flight Crew Operating Manual Volume 2

Function Keys (Cont’d)
A self test sequence of any radio is available. Press/hold the

key with the cursor placed around the frequency or code to activate an internal test sequence of the selected system.

NOTE
Not all of the test events which can be displayed are shown. Only the ADF Pass/Error example is represented.
The

key must be held down for the duration of the test for approximately:
.
2 seconds for VHF COM and HF COM.

.
5 to 7 seconds for DME, ATC, ADF.

.
20 seconds for NAV (VOR/ILS).

.
The TCAS test function is as follows.

After the test is complete, a PASS or ERR (error) legend will appear in the window.
NOTE
If the

key is held for 30 seconds or more, the radios are automatically commanded back into normal operation.
Releasing the

key at any time, immediately returns the function to normal operation.
Volume 2 Flight Crew Operating Manual Rev 3, Apr 25, 2005

Function Keys (Cont’d)
　
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier_Global-通讯(7)