曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
SPEED mode. The ATS will retard the throttle levers for four seconds in an attempt to protect the VMO/MMO limit, and then the servo commands stop. The LIMIT message cancels when the airspeed is below the limit speed, and the ATS remains in the SPEED mode.
MSD Messages
Mode Status Display Messages & Logic
MESSAGE COLOR/STATE DEFINITION
AOA LIMIT ATS protecting AOA limit
DESCENT Descent mode – with AFCS
FLC
DISENG’D ATS disengaged FAIL Amber – Flashing ATS failed
FAIL ATS failed, prior to selftest, or
power loss to computer N1 APR APR thrust limit mode (FMS) –
prohibited mode N1 CLB Green – Steady Climb N1 limit mode (FMS)
N1 CRZ Cruise N1 limit mode (FMS)
N1 HOLD TO mode, airspeed >80Kts, alt
<320ft
N1 MCT Green – Steady MCT limit mode (FMS) – prohibited mode
N1 TGT Green – Steady Pilot selected thrust limit mode (FMS)
AUTOMATIC FLIGHT CONTROL SYSTEM Description Vol. 2 04.10.73
Oct 05/06
MESSAGE COLOR/STATE DEFINITION N1 TO TO mode, airspeed >80Kts + 4
min. N1 TO TO mode RETARD Throttle retard mode, RA <50ft SELFTEST Green – Scrolling Self test in progress
SELFTEST Amber – Scrolling SERVOTST Servo test in progress (ground maintenance test function only) SPEED Amber – Flashing Speed mode, airspeed 20Kt/.06M below speed bug +
10 sec, and N1 at limit SPEED Speed mode, RA <100 ft SPEED Speed mode SPEED N2 Green – Steady N2 synchronization set SPEED ATS protecting MMO limit,
MMO LIMIT speed mode activated SPEED
Green – Steady ATS protecting VMO limit,
VMO LIMIT
Amber – Flashing speed mode activated
MSD Error Messages
The following MSD error messages may be displayed, with only one error message displayed at a time. If multiple error conditions exist, that error condition must be corrected in order to display the next message.
If an amber fail message is displayed, the ATS pushbutton can be pressed and held until a fail fault message is displayed, to help in troubleshooting the failure.
The following table describes the error messages and color logic, but does not cover the definition of each message due to the complexity of interface between components and systems configuration. Reference should be obtained from the Aircraft Maintenance Manual for message definition description.
Mode Status Display Error Messages
MESSAGE COLOR/STATE
ADC ERR Amber – Steady AFCS ERR Amber – Steady AOA ERR Amber – Steady ATS COMM FAIL Green – Steady
Amber – Steady BRAKE ERR Amber – Steady FCC ERR Amber – Steady
AUTOMATIC FLIGHT CONTROL SYSTEM Description Vol. 2 04.10.74
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址:庞巴迪挑战者605公务机机组操作手册 CL605-AUTOMATIC_FLIGHT_CONTROL_SYSTEM(30)
|