曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
SKIP
The SKIP switch is used to skip checklist items on the display.
FRMT
The FRMT switch is used to select the MFD format (PPOS, Plan, and TCAS modes).
TFC
The TFC switch is used to select TCAS overlays on the MFD.
TR/WX
The TR/WX switch is used to select terrain, weather and lightning overlays on the MFD.
ENTER
The ENTER switch is associated with the joystick and enters the PPOS waypoint or selects the current menu item in the top half of the MFD.
SUMRY
The SUMRY switch is used to display the EICAS summary display on the MFD.
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
11-01-23 MULTIFUNCTION DISPLAYS (MFD) (Cont)
A/ICE
The A/ICE button is used to display the Anti-Ice synoptic page.
ECS
The ECS button is used to display the Environmental Control System synoptic page.
ELEC
The ELEC button is used to display the Electrical synoptic page.
FLT
The FLT button is used to display the Flight Controls synoptic page.
FUEL
The FUEL button is used to display the Fuel synoptic page.
HYD
The HYD button is used to display the Hydraulic synoptic page.
3D Map Display (Optional)
The optional 3D Map Format is an advanced FMS feature that provides lateral, vertical and performance predicted flight plan information in a single combined three-dimensional (3D) format on the MFD. The 3D presentation depicts the flight plan and predicted vertical trajectory of the aircraft so the pilot can interpret the current and future aircraft situation. The display is referenced to true North and the waypoints are drawn at their actual latitude and longitude. The CCP Joystick, SHLDR, SIDE, and PLAN are used to control the presentation. The Joystick is used to rotate the display clockwise, coun-terclockwise, and vertical viewing angles from 90° to 0°. Refer to the Rockwell-Collins Pro Line 21 Avionics System Operator’s Guide for a more detailed description.
AUTO
When AUTO view is on, the MFD will automatically rotate the view to maintain a consistent viewing angle as the inbound course changes. When flying a curved flight leg or holding pattern, the viewing angle is the inbound course relative to the abeam point angle.
PLAN
When the PLAN switch is pushed, the display will give a vertical view of the inbound course.
SHLDR
When the SHLDR view is displayed, the viewing angle is 22° lateral and 75° vertical, relative to the inbound course.
SIDE
Selecting SIDE view on the 3D display will provide the pilot with 90° lateral and 90° vertical viewing angles, relative to the inbound course.
Volume 2 Flight Crew Operating Manual Sep 13/2004 CSP 100-6 REV 1
11-01-24 DISPLAY CONTROL PANEL (DCP) DESCRIPTION
The display control panel (DCP) controls the information displayed on the PFD and controls the radio functions on the MFD.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(18)
|
