|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
COMPONENTS AND OPERATION
The following is a brief description of the DCP control knobs, switches, and push buttons:
The 1/2 button selects and deselects the cross-side radio menu on the MFD. When a radio submenu is in view, the equivalent cross-side radio submenu is selected/deselected, when the RADIO button is pushed.
DME/H (DME HOLD)
The DME H button selects and deselects the DME hold function. When DME hold is selected, the DME holds the current NAV frequency while allowing the VOR radio to be independently tuned.
NAVSRC (NAVIGATION SOURCE)
The NAV SRC button enables the display of a list of NAV sources on the PFD with the next NAV Source selected. Repeated pushes of the NAV SRC button select the next listed NAV source as the new active NAV source. The NAV source list au-tomatically times out.
FRMT (FORMAT)
The FRMT button directly selects the current PFD display format between present position (PPOS) and compass rose (ROSE).
TFC (TRAFFIC)
The TCAS is overlaid on the PFDs compass rose or map mode display by momentarily depressing the DCP TFC button. When there is not an active RA or TA, the range is the last active TCAS range A second momentary press of the TFC button removes the TCAS overlay. Continuously pressing TFC for more than 1 second selects the compass rose/TCAS format with the range set to the default 10 mi full range. Radar or terrain overlays, if previously displayed, are removed.
TR/WX (TERRAIN/WEATHER/LIGHTING)
The TR/WX button is a multiple mode selection button that selects and deselects the display of terrain, weather, and light-ning (if installed) on the PFD. The first push of the TR/WX button selects a new state in the TR/WX list. The PFD auto-matically changes the range to an appropriate range if required. Pushing the TR/WX button again moves the cursor to the next available state. If the TAWS declares a terrain awareness warning or caution, pressing the TR/WX button causes an immediate response, regardless of the current format. The first momentary press of the TR/WX button selects terrain for display at its default 10 nm range and PPOS format.
TUNE
The tune knob is a rotary control used for MFD radio tuning. The larger and smaller knobs change the most significant and least significant digits of the frequency respectively. The up down arrow button in the center of the TUNE knob swaps the recall and the active frequencies.
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
11-01-25 DISPLAY CONTROL PANEL (DCP) (Cont)
RADIO
Pressing the RADIO button selects and deselects, on the MFD, the tuning control sub-menu of the radio associated with the current position of the tuning control. Pressing the RADIO button when another menu is displayed closes the menu and returns the tune box to its home position.
BRGSRC (BEARING SOURCE)
The BRG SRC button displays a menu of Bearing pointer sources on the PFD with the current Bearing pointer source high-lighted. The Menu knob and Data knob and Push Select are used to select and deselect the Bearing pointers.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(19)
|
