曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
GLIDESLOPE FLAG
During an ILS, with invalid glideslope information, a red boxed GS flag is displayed, replacing the pointer and scale.
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
11-01-05 PRIMARY FLIGHT DISPLAYS (Cont)
DECLUTTER
De-clutter is used to clear all nonessential information from the PFD during aircraft upset or unusual attitudes.
When the pitch angle exceeds +30 or -20 degrees, or roll exceeds 65 degrees left or right, only the following information is displayed on the PFD:
-Altitude
-Airspeed
-Attitude
-Vertical speed
-Heading indication
-FCC transfer indicator
When the pitch and roll limits are restored, the PFD resumes displaying all information.
Example of decluttered EADI in excessive roll
Volume 2 Flight Crew Operating Manual Sep 13/2004 CSP 100-6 REV 1
11-01-06 PRIMARY FLIGHT DISPLAYS (Cont)
CFO1101002_019
Example of decluttered EADI in excessive pitch
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
11-01-07 PRIMARY FLIGHT DISPLAYS (Cont)
ALTITUDE
Barometric altitude information on the PFD consists of:
-Altitude display and readout
-Preselect altitude
-Altitude alert
-Barometric pressure setting readout
-Minimum descent altitude (MDA)
The ADC calculates the pressure altitude and barometric corrected altitude. The altitude is preselected with the controls on the FGP. Barometric pressure setting and DH/MDA is set through the REFS menu.
ALTITUDE DISPLAY
The altitude display is shown on the right side of the PFD as a moving tape with a fixed digital readout window.
The fine portion of the tape is marked and numbered every 100 feet. The coarse portion of the tape is used to assist the pilot in altitude captures and gross altitude awareness and is not numbered. It is marked with large rectangles for increments of 1000 feet and small rectangles for 500 feet. The barometric altitude readout ranges from -1000 feet to 50 000 feet. The digital readout in the fixed altitude window indicates the actual altitude.
350 00 16000
29.92 IN
Volume 2 Flight Crew Operating Manual Sep 13/2004 CSP 100-6 REV 1
11-01-08 PRIMARY FLIGHT DISPLAYS (Cont)
ALTITUDE DISPLAY (Cont)
PRESELECTED ALTITUDE
The preselected altitude bug and digital readouts are set by using the ALT knob on the FGP. The preselect altitude is a ref-erence for the altitude alert and autopilot systems. If the spring operated ALT knob is pushed, the preselect altitude incre-ments are 100 feet or 10 meters. If the ALT knob is in the normal out position, the preselect altitude increments are 1000 feet or 100 meters. If a hundred foot value has been previously set, this will be reset to the next higher/lower thousands value with the first rotation of the knob.
When BARO MIN is ON, the preselect altitude can be set at the value of BARO MIN. Rotating the knob one click coun-terclockwise from the closest thousand food increment above the baro minimums will result in the altitude preselect being set at the exact baro minimums. this allows leveling off at the exact non-precision approach minimums using the flight di-rector or autopilot on approach.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(8)
| 
