庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(20)_飞行翻译_公务机_公务航空_Business Jet

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
　　
MENU/DATA/PUSH SELECT
The MENU knob is a rotary control used to move a cyan selection box, to allow activation of various display items on the PFD and MFD. The DATA knob is a rotary control used to change the value in the selection box.
The PUSH SELECT button located in the center of the MENU/DATA knob makes the value entered with DATA knob, the active display value or change the state of the item in the selection box.
REFS (REFERENCE)
The selected V-speed references are displayed on the airspeed display. V1, VR, V2, VT, VGA, and VREF are initialized to default values but deselected, which the pilot may change as required.
The REFS push button located on the DCP is used to select the desired reference menu. Repetitive pushes of the REFS button toggle through the three pages of the REFS menu.
RADAR
The RADAR button selects and deselects the radar control menu on the PFD. The radar control menu provides mode, ground clutter suppression, gain, sector scan, and target.
TILT-RANGE/PUSH AUTO TILT
The RANGE knob is a rotary knob with a function to control the decrease or increase of the PFD and MFD Nav display
range until the minimum or maximum range is reached.
The TILT knob is a rotary control to select the radar antenna tilt range (-15 to +15 degrees).
The PUSH AUTO TILT button located in the center of the RANGE/TILT knob selects and deselects automatic tilt control.

DISPLAY CONTROL PANEL WARNING FLAG
A display control panel (DCP) failure results in the display of an amber boxed DCP flag. This flag will appear on the PFD and MFD displays.
Volume 2 Flight Crew Operating Manual Sep 13/2004 CSP 100-6 REV 1
11-01-26 REVERSION SWITCH PANEL DESCRIPTION
The reversion switch panel provides an EFIS system capability for the selection of alternate sources of sensor data, radio tuning, and the selection of reversionary PFD modes.

COMPONENTS AND OPERATION
The following is a brief description of the reversion switch panel switches:
LEFT DISPLAYS
The left display reversion switch is a three-position rotary switch, dedicated to enable the reversion of the left MFD/PFD displays.
Position — PFD REV
L-PFD displays compressed format. L-MFD is shut down.
Position — NORM
L-PFD format is normal. L-MFD format is normal.
Position — MFD REV
L-PFD is shut down. L-MFD displays compressed PFD format.
Sep 13/2004 Flight Crew Operating Manual Volume 2 REV 1 CSP 100-6
11-01-27 REVERSION SWITCH PANEL (Cont)

RIGHT DISPLAYS
The right display reversion switch is a three position rotary switch, dedicated to enable the reversion of the right MFD/PFD displays.
Position — MFD REV
R-MFD displays compressed PFD format. R-PFD is shut down.
Position — NORM
R-MFD format is normal. R-PFD is normal.
Position — PFD REV
R-MFD is shut down. R-PFD displays compressed format.
　
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(20)
　

飞行翻译_公务机_公务航空_Business Jet_Business Aviation

搜索

热门标签

庞巴迪挑战者300公务机机组操作手册 Bombardier Challenger-飞行仪表(20)