|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
.
When an alphanumeric entry is made in the scratchpad, one character is cleared from the scratchpad (from right to left) each time the CLR key is pushed. If the CLR key is held down after the first character is cleared, other characters are cleared, one at a time, until the key is released.
Delete (DEL) Key
The DEL key is used to delete items from the FMS. When the DEL key is pushed, “DELETE”is displayed in the scratchpad. The DEL key can be line selected to delete waypoints or other items displayed in the CDU data fields. When there is a message displayed, the delete function is inhibited. DEL is also used to return default values after entries have been made.
Volume 2 Flight Crew Operating Manual Rev 2A, Apr 11, 2005
FMS Update
To update an FMS (pre-flight), proceed as follows:
The NAV IDENT page is displayed when power is first applied. All parameters should be checked and/or set.
NOTE
The date and time displayed on this page is synchronized with GPS date and time. The date and time can be changed only if the GPS is failed or does not have a valid date/time.
DATE
1.
To set the date, enter information in scratchpad using the alphanumerical keys.
2.
To enter the new date press 1L.
TIME
1. To set the time, enter information in scratchpad using the alphanumerical keys.
Rev 2A, Apr 11, 2005 Flight Crew Operating Manual Volume 2
NAVIGATION
FLIGHT MANAGEMENT SYSTEM (FMS) (CONT'D) FMS Update (Cont’d) TIME (Cont’d)
2. To enter the new time press 2L.
Position Initialization (POS INIT)
1. To select POS INIT press 4R.
The POSITION INIT page displays the LAST POS coordinates and the closest ramp within 3 NM or closest airport reference point (KCIT) within 3 NM of the last position.
2.
To initialize position, select appropriate LOAD prompt.
3.
After initialization, the FLT PLN prompt is displayed. Select 4R to continue pre-flight.
Volume 2 Flight Crew Operating Manual Rev 2A, Apr 11, 2005
NAVIGATION
FLIGHT MANAGEMENT SYSTEM (FMS) (CONT'D)
Flight Plan
1.
To select FLT PLN press 4R.
2.
Enter destination (KORL) in the scratchpad and press 2R.
When a destination is entered, the FMS searches for stored flight plans with the same origin and destination. If any flight plans are found, the FLIGHT PLAN LIST page is displayed.
Flight Plan (stored)
1. Enter flight plan name in the scratchpad and press 1R.
If a flight plan name is entered that has not been previously defined, the FMS displays pages that are used to enter an undefined flight plan. The flight plan can also be selected through the FPL LIST from the NAV INDEX page.
Rev 2A, Apr 11, 2005 Flight Crew Operating Manual Volume 2
CSP 700.5000.6 17.10.67
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-导航(25)
| 
