|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Below 10,000 feet
500 feet
1000 feet
Negative Altitude
GF1110_022
Volume 2 Flight Crew Operating Manual Rev 5, Jul 21, 2005
Altitude trend vector information is derived from the selected ADC. It will indicate what the altitude of the airplane will be in 6 consecutive seconds, based on current vertical speed.
SELECTED ALTITUDE READOUT
The readout reflects the position of the altitude reference bug on both PFDs, with a range of 0 to 51,000 feet.
A boxed barberpole symbol will appear if the digital readout is < 10,000 feet.
The readout can be displayed in metric, with a range of 0 to 15,500 meters, using the MENU display selection on the MFD control panel, located on the pedestal.
SELECTED ALTITUDE BUG
The altitude bug is set using the ALT knob on the guidance panel. The bug will park at the appropriate end of the altitude tape when off scale. At this position, one half of the bug will be in view.
Below 10,000 feet
Guidance Panel
Selected Altitude Readout
Selected
Altitude Bug
Altitude
Rolling Digits
Altitude
Trend Vector
Selected Altitude Readout . Metric
Rev 5, Jul 21, 2005 Flight Crew Operating Manual Volume 2
FLIGHT INSTRUMENTS
Radio altitude is displayed on the bottom of the attitude indicator.
The radio altitude readout range is from 0 feet to 2550 feet and is displayed as follows:
.
5 foot increments . Altitude less than 200 feet
.
10 foot increments . Altitude ≥ 200 feet but < 1500 feet
.
50 foot increments . Altitude ≥ 1500 feet
RADIO ALTITUDE LOW ALTITUDE AWARENESS
Low altitude awareness is displayed as an indication of the ground with respect to current barometric altitude.
Low altitude awareness is displayed when radio altitude is between 0 and 550 feet.
Radio Altitude Readout 300 feet
Radio Altitude Readout 0 feet Low Altitude Awareness 300 feet
Low Altitude
Awareness 0 feet
Low Altitude Awareness .300 feet
GF1110_024
Volume 2 Flight Crew Operating Manual Rev 5, Jul 21, 2005
ATTITUDE DIRECTOR INDICATOR (ADI)
The ADI provides pitch, roll and roll pointer (slip/skid) information.
0° 10° 20° 30°
15°
5° 2.5°
Vertical Tape
GF1110_025
Rev 5, Jul 21, 2005 Flight Crew Operating Manual Volume 2
FLIGHT INSTRUMENTS
The Flight director command bars can be displayed in Single Cue (SC) airplane symbol or Cross Pointer (CP) airplane symbol. Selections are made on the MFD control panel, located on the pedestal, using the MENU button. If pitch or roll command is invalid, the flight director command bars are removed.
Single Cue
Desired Attitude
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-飞行仪表(11)
| 
