曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Ground Speed Readout
The ground speed readout is based on the FMS ground speed. It has a range of 30 kt thorough
900 kt inclusively at 1 knot increment.
The ground speed readout is displayed in place of the Mach readout below the airspeed tape.
Ground speed is displayed when:
.
Weight off wheel condition, and
.
Flight Director approach mode is set.
Volume 2 Flight Crew Operating Manual Rev 7, Dec 01, 2005
Ground Speed Readout (Cont’d)
STALL Annunciation
GF1110_081a
Low Speed Awareness Ground Speed
Thermometer Readout
Vertical Speed Readout
The vertical speed readout is located below the altitude tape. The digital readout is displayed when the main landing gear is weight-off-wheel.
The range of the displayed value is ±9900 fpm. For vertical speed between ±1000 fpm the information is rounded to the nearest 50 fpm. For vertical speed greater than ±1000 fpm, the information is rounded to the nearest 100 fpm.
Vertical Speed Target
The vertical speed target is located above the vertical speed readout when the FD vertical captured submode is VS or VPTH. The vertical speed target readout is labeled VS or VN, according to the FD vertical captured mode.
The vertical speed target readout is limited to the range of .8000 fpm through 6000 fpm. The sign is replaced by an arrow pointing up (↑) for a positive value and down (↓) for a negative value. When the vertical speed target is within ±1000 fpm, the indication is rounded to the nearest 50 fpm. When the vertical speed target is exceeding ±1000 fpm, the indication is rounded to the nearest 100 fpm.
BARO Minimum Readout
The BARO minimum indication is displayed in 10 foot increments at the left of the BARO set readout and labeled BARO. It is displayed when the selected MDA is valid and greater than 20 feet.
Rev 7, Dec 01, 2005 Flight Crew Operating Manual Volume 2
FLIGHT INSTRUMENTS
MDA Bug
An MDA bug is displayed next to the altitude tape according to the MDA information. It is displayed when the selected MDA is valid and greater than 20 feet.
MDA Bug
Vertical Speed Target
Vertical Speed Readout
10
BARO Minimum
Conformal Heading Scale
The scale is marked above the horizon line in 5 degree increments and can display a range of approximately 25 degrees. The heading mode is either Magnetic or True as selected via the FMS and indicated on the HUD.
Conformal Heading Index
The conformal heading index is located above the horizon line to indicate the airplane heading in reference to the external scene.
To avoid clutter with the airplane reference symbol, it is only displayed when the pitch angle exceeds ±2 degrees and remains greater than ±1.5 degrees.
Conformal Selected Heading Bug
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-飞行仪表(31)
|
