曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Airspeed Readout
The airspeed readout is located in the value window in the center of the airspeed tape. The airspeed readout is displayed in 1 kt increments and has priority over the airspeed tape and all symbology.
Airspeed Trend Vector
The airspeed trend vector indicates the airspeed the airplane will attain in 6 seconds assuming the current acceleration is maintained.
Selected Airspeed Readout
The selected airspeed readout is located above the airspeed tape between two horizontal lines. It has a resolution of 1 kt and has a range of 0 kt through 900 kt inclusively. The Selected Airspeed is displayed when:
.
Indicated Airspeed is valid, and
.
Selected Airspeed is valid, and
.
IAS FMS/Man indicates Manual, and
.
Selected Airspeed Type is IAS and less than VMO.
NOTE
VMO is displayed when the selected airspeed is at VMO.
Selected
AirspeedAirspeed
Tape
Airspeed Readout
Airspeed Trend Vector
GF1110_077a
Volume 2 Flight Crew Operating Manual Rev 7, Dec 01, 2005
Selected Airspeed Bug
The selected airspeed bug is displayed to the left of the airspeed tape. The airspeed bug will display either Manual airspeed bug selection or FMS speed depending on the selection of IAS FMS/Man in either MAN or FMS.
When the selected airspeed is off-scale, the airspeed bug is located at the appropriate end of the airspeed tape and one half of the symbol is masked.
FMS Selected Airspeed
The FMS selected airspeed is displayed in place of the selected airspeed readout with an “F”label in large font, with a resolution of 1 kt and has a range of 0 kt through 900 kt inclusively. The FMS speed is displayed when:
.
IAS is valid, and
.
FMS speed is valid, and
.
IAS FMS/Man indicates FMS, and
.
FMS speed reference is speed.
FMS Selected
Rev 7, Dec 01, 2005 Flight Crew Operating Manual Volume 2
FLIGHT INSTRUMENTS
Mach Readout
The Mach readout is located below the airspeed tape when the Mach exceeds 0.450 M and remains greater than 0.400 M. The Mach readout has a resolution of 0.001 M.
Selected Mach Readout
The selected Mach readout is displayed in large font in place of the selected airspeed readout and has a resolution of 0.01 M. The selected Mach is displayed when:
.
Airspeed tape is displayed, and
.
IAS FMS/Man indicates MAN, and
.
Selected airspeed type is Mach and less than MMO.
NOTE
MMO is displayed when the selected airspeed is at MMO.
FMS Selected Mach Readout
The FMS selected mach readout is displayed above the airspeed tape with a letter “F”. It is displayed in large font in place of the selected airspeed readout, and has a resolution of 0.01 M. The FMS readout is displayed when:
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪环球5000公务机机组操作手册 Bombardier Global-飞行仪表(29)
| 
