|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Course Pointer
The course pointer is an arrow that points to the pilot-selected course. When VOR or LOC is the active NAV source, the selected course is set via the CRS selector knob on the FCP. The on-side color is green and cross-side is yellow.
When the FMS is the active NAV source, the associated CRS knob is inactive.
Lateral Deviation Scale (Compass)
The lateral deviation scale has two dots on each side of the course arrow. When in VOR, each dot represents five degrees of deviation. In LOC, each dot represents one degree of deviation.
In FMS the lateral deviation sensitivity is:
Enroute:
. ±5 NM
In terminal area within 30 NM from ARP:
.
±1.0 NM for RNAV approach
.
±1.0 NM for GPS approach (±0.3 NM at the FAF)
Lateral Deviation Indicator (ADI)
If LOC is the preselect or active NAV Source, a lateral deviation indicator is displayed below the ADI. The lateral deviation indicator has two dots on each side of the center portion.
The lateral deviation is displayed as a diamond-shaped pointer against a lateral analog scale. The deviation pointer goes out of view when LOC is no longer the active NAV source.
In case of a LOC failure, the diamond pointer will be removed, and a red boxed LOC will be displayed on the left side of the deviation indicator.
When FMS is the active NAV source, the lateral deviation indicator is also in view for lateral commands to be displayed. The lateral deviation pointer is displayed as an FMS waypoint symbol (magenta).
If the active NAV or PRESET NAV source is missing, the lateral deviation pointer will not be displayed.
FLIGHT INSTRUMENTS Description Vol. 2 11.10.44
Oct 05/06
TO/FROM Indicator
The TO/FROM indicator is a small triangle indicating the relative direction of the selected VOR station or FMS waypoint.
The color of the TO/FROM indicator is green for VOR on-side information and yellow for cross-side information. In FMS mode the NAV data is magenta.
Bearing Source and Pointers
The bearing pointers are selected for display from the PFD Main Menu, BRG SRC submenu. The bearing source and pointers are displayed to the left of the ROSE and PPOS formats.
The pointer for left side sensors (BRG PTR 1) is a cyan single bar arrow, and the pointer for right side sensors (BRG PTR 2) is a white double bar arrow. A valid bearing distance, associated with the bearing source, is also displayed to the right of the bearing icon.
If the selected bearing is also displayed as active NAV source, the bearing distance and ident will not be displayed.
For VOR bearing: The distance will be blank if DME Hold is selected or, when LOC is tuned, the pointer will be removed.
If a VOR bearing is displayed with true heading selected, the bearing pointer will be displayed without correction for magnetic variation, and a white “T” is displayed after the bearing icon.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者605公务机机组操作手册 CL605-飞行仪表 FLIGHT_INSTRUMENTS(19)
| 
