|
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Cursor Control Panel (CCP)
The cursor control panels (CCPs), located on the center pedestal, permit the pilots to select the information for presentation on the MFDs. The left CCP controls the selectable information displayed on the left MFD. The right CCP controls the selectable information displayed on the right MFD.
The CCP is divided into 5 functional sections, of which the following 3 sections are applicable to Flight Instruments:
.
MFD window formatting – Allows selection of navigation formats, display and control of on-screen menus, and enables overlays.
.
Memory keys – Allow the crew to save specific display formats to memory for quick access.
.
Chart controls – Display charts from the optional chart system.
Cursor Control Panel (CCP) Figure 11.10.8
MFD Window Formatting
MENU ADV/DATA/PUSH SELECT Knob (Double Stack Knob)
Like on the DCP, the menu advance and data rotary knob is used to control the display menus.
After a menu has been selected, the MENU ADV (outer knob) provides rotary control to move the focus indicator within the menu, and the DATA (inner knob) provides rotary control to change the selection in the focus indicator.
UPR MENU (Upper Menu) Pushbutton
The UPR MENU pushbutton selects the menu for the MFD upper window.
FLIGHT INSTRUMENTS Description Vol. 2 11.10.10
Oct 05/06
LWR MENU (Lower Menu) Pushbutton
The LWR MENU pushbutton selects the menu for the MFD lower window.
MFD Main Menus Figure 11.10.9
ESC (Escape) Pushbutton
The ESC pushbutton provides the means to back out of a menu selection.
LWR FRMT (Lower Window Format) Pushbutton
This pushbutton removes any synoptic overlays from the lower window. Additional presses cycle through the available formats.
MFD Direct Access FORMAT Menu Figure 11.10.10
TR/WX (Terrain/Weather/Lightning) Pushbutton
TR/WX is a multiple press pushbutton, used to select or deselect the display of Terrain, Weather and Lightning on the MFD. The first press of the TR/WX pushbutton selects the next overlay available on the MFD. A subsequent press selects the next overlay available.
MFD Direct Access TR/WX Menu
Figure 11.10.11
FLIGHT INSTRUMENTS Description Vol. 2 11.10.11
Oct 05/06
TFC (Traffic) Pushbutton
The TFC pushbutton selects or deselects a traffic display overlay on the current MFD format. If traffic is selected for display, and the current format/range is not compatible, the MFD will automatically display TRAFFIC ONLY, and change the range to 10 NM.
Memory Keys
MEM 1, MEM 2, MEM 3 (Quick Access Keys) Pushbuttons
The quick access keys permit the pilot to store three configurations of upper and lower MFD windows. A momentary press of a quick access key selects the desired combination. Pressing and holding the key for more than 3 seconds causes the current upper and lower MFD window configuration and selections to be stored for future recall.
中国公务机网 www.gongwuji.com
公务机翻译 www.aviation.cn
本文链接地址：庞巴迪挑战者605公务机机组操作手册 CL605-飞行仪表 FLIGHT_INSTRUMENTS(6)
| 
